Page 1 of 1

My Hozelock / Gardena Launcher - 15mm Copper fittings

Posted: Tue Nov 13, 2018 6:02 am
by mac_xpert
For info and to help others with ideas, here is my launcher:
Launcher.jpg
Its made from some ply that i had laying around. I used 15mm copper pipe and compression fittings to 'plumb' it all together. It has a check valve (non return) to prevent water entering the air pump. It has a valve for filling / releasing pressure if needed.

Here is a picture of it pre launch:
Launcher_ready.jpg