Hallo Rocketeers!
A possible variant to refuelling of water rockets is operational. I was it suffering to always put my Roc `to s on `s cross in order to fill in H2O. I use one doubles working pump added and can the rocket in initial position now refuel. A hose end is put into the water the available, the other end by connectors into the clutch for the air refueling rests. A stroke of the pump carries 0.7 litres of H2O by the inflating tube from downside into the rocket. The inserted check valve in the connector prevents a running out of the water when unlocking the hose. Then the air hose comes into the same clutch, fills and lift off!
Regards Batkiter
Filling
-
- WRA2 Member
- Posts: 871
- Joined: Wed Jan 31, 2007 1:44 am
-
- WRA2 Member
- Posts: 11
- Joined: Fri Jun 12, 2009 3:40 pm
Re: Filling
Very impressive!
"If space is truly infinite, then there is infinite possibility - Tom DeLonge".
-
- WRA2 Member
- Posts: 871
- Joined: Wed Jan 31, 2007 1:44 am
Re: Filling
There you go and bring up this old topic and I see the photos of that launcher and I get jealous again! I wish I could make something that sophisticated!pink13penguin wrote:Very impressive!
Tim Chen
Captain, Team Enterprise
Captain, Team Enterprise
-
- Advanced Member
- Posts: 94
- Joined: Tue Apr 10, 2007 9:10 am
Re: Filling
Hi Batkiter! I was looking at the pictures again and noticed that you use welded aluminum for your launcher struts. I am very impressed with your welds! I have tried to weld aluminum before and I have ruined a lot of stock and never got the skill mastered. I just wanted to let you know that I am really impressed with your welding. Is there anything you cannot do?