Page 1 of 1

Metalic gardena connected to quick-release for compressors

Posted: Sun Sep 13, 2009 3:40 pm
by RaZias
These are photos of a metalic quick-release gardena glued by epoxy to a metalic quick-release for compressors.

As you see this allows to connect it to a hose with a small lumen. A small lumen means that the hose has a small volume inside so all effort to pressurize goes to the rocket.

Hoses with a big lumen means more volume to pressurize...
Foto1.jpg
Foto2.jpg

Re: Metalic gardena connected to quick-release for compresso

Posted: Thu Sep 24, 2009 12:41 pm
by Jelo
that seems pretty advanced :mrgreen:

Re: Metalic gardena connected to quick-release for compresso

Posted: Thu Sep 24, 2009 3:20 pm
by RaZias
Jelo wrote:that seems pretty advanced :mrgreen:
The advantage is to easly change the house and the hability to connect to any house made for compressors.

I use a 20 bar house, later I can change for a 30 bar use for example.

Re: Metalic gardena connected to quick-release for compresso

Posted: Sun Oct 25, 2009 5:07 pm
by eljose707
Cool!