New to water rockets from Czech Rep

This forum is for new members to introduce themselves and tell us how they got started in water rocketry.
Post Reply
Matej
New Member
Posts: 2
Joined: Fri Oct 28, 2016 6:02 pm

New to water rockets from Czech Rep

Post by Matej » Sun Oct 30, 2016 5:28 am

Hi,

Just discovered water rockets and got quite excited by the performances of those little guys. I want to build a rocket launcher using the classical cable tie style as described for example here: http://www.uswaterrockets.com/construct ... torial.htm . Now my concerns is that in Europe it is very hard to source imperial dimensions PVC tubes. So my first question is linked to the use of a 20mm (OD) PVC tube as launch tube instead of the 1/2 inch one. As the fitting with the bottle would be less tight, I am worry the guiding of the rocket during the launch phase won't be so effective. Does anyone has experience with that ?

It seems that this topic was already adressed a few times in this forum, especially here: http://www.wra2.org/forum/viewtopic.php?f=46&t=797 . But unfortunately the link is dead....

Thanks !

M



User avatar
China_WaterRocket
WRA2 Member
WRA2 Member
Posts: 99
Joined: Fri Feb 10, 2017 9:36 am

Re: New to water rockets from Czech Rep

Post by China_WaterRocket » Thu Mar 02, 2017 12:44 am

Have a chance to try this
You do not have the required permissions to view the files attached to this post.


I come from China, do not understand English, your information I use the translation software to view. I like water rockets, technology is the same, I hope we can become friends.

Post Reply