BWR Coupling

Discussions about rockets, construction materials, adhesives, nozzles, nosecones and fin design.
danb
Advanced Member
Advanced Member
Posts: 50
Joined: Sun Sep 26, 2010 4:30 am

BWR Coupling

Post by danb »

Over the last few months the BWR crew have been trying to find new ways of constructing new couplings to join bottles to make larger rockets there has been many failed designs but one stood out and was the simplest to construct it involves heat welding two bottle caps back to back it took a few attempts to get it right but i think we have mastered it for more info checkout the team blog
http://www.bwrockets.blogspot.com i am in the process of making a construction tutorial video

Dan B Team BWR
Attachments
2011 06 12_0273_edited-1.jpg
2011 06 12_0273_edited-1.jpg (257.58 KiB) Viewed 122 times
danb
Advanced Member
Advanced Member
Posts: 50
Joined: Sun Sep 26, 2010 4:30 am

Re: BWR Coupling

Post by danb »

Ive added a tutorial video on making the coupler on my vimeo page.
here is the link [vimeo][/vimeo]

Dan B
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: BWR Coupling

Post by RaZias »

At the end of the video the last frame the bottle is grey ? It´s that a Pepsi bottle ?

I had 2L grey pepsi bottle without parachute so it crashed every time, it would get crushed and would get marks.

I represurized it to 110 psi and it never blasted...I don´t know what the PET from Grey Pepsi bottle had better than others. In fact it´s like a grey/blue color.

Maybe it´s like this one if I remember:

http://www.flickr.com/photos/like_the_g ... 790578020/
Research and Development is the soul of WR
danb
Advanced Member
Advanced Member
Posts: 50
Joined: Sun Sep 26, 2010 4:30 am

Re: BWR Coupling

Post by danb »

In the uk these silver grey bottles are 1L in capacity and have cheap energy drink inside them i had a 4L rocket it crashed hard on several occasions and these bottles just kept on going i think they must be a thicker PET.

Dan B
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: BWR Coupling

Post by U.S. Water Rockets1 »

danb wrote:In the uk these silver grey bottles are 1L in capacity and have cheap energy drink inside them i had a 4L rocket it crashed hard on several occasions and these bottles just kept on going i think they must be a thicker PET.

Dan B
Have you had them up to pressure at all? We made cheap couplers using special glue that is designed for this kind of plastic because welding them didn't hold up to much pressure. They make "tornado tubes" this way, and we tried to copy it but it was not a success. Is there a trick to getting the welds to be strong? If so, what did you find out?
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
danb
Advanced Member
Advanced Member
Posts: 50
Joined: Sun Sep 26, 2010 4:30 am

Re: BWR Coupling

Post by danb »

I have had them up to 120psi and left them there for 2 mins trying to simulate launch conditions i am yet to test there full bursting pressure. The way i welded them was when i saw a ring of molten plastic form round the outside of cap i knew they were ready to be joined together. Im yet to test the couplers in flight so when the weather behaves itself i will update the results.

Dan B
User avatar
pudresful
WRA2 Member
WRA2 Member
Posts: 41
Joined: Sat Sep 04, 2010 9:57 am

Re: BWR Coupling

Post by pudresful »

does that really hold??? 1 year ago I glued 2 caps with epoxy and 5 bars was enought...
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: BWR Coupling

Post by U.S. Water Rockets1 »

danb wrote:I have had them up to 120psi and left them there for 2 mins trying to simulate launch conditions i am yet to test there full bursting pressure. The way i welded them was when i saw a ring of molten plastic form round the outside of cap i knew they were ready to be joined together. Im yet to test the couplers in flight so when the weather behaves itself i will update the results.

Dan B
It's possible that you came across a new way of getting them welded. We could never get them hot enough to form a bead like that without melting the whole cap causing it to sag or get distorted. Do you have a temperature setting you used? Or a duration to hold the cap in the heat? It sounds like you have solved the problems!
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison