Nose cone bottles
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Nose cone bottles
Finally found a decent nosecone bottle-
Topo Chico
Any other favorites?
Topo Chico
Any other favorites?
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 442
- Joined: Mon Apr 09, 2012 3:49 pm
Re: Nose cone bottles
How did you get that nice smooth top??
-Blenderite
Check out my YouTube channel: https://www.youtube.com/c/Blenderite
"Get it right, then go for GREATNESS!"
Check out my YouTube channel: https://www.youtube.com/c/Blenderite
"Get it right, then go for GREATNESS!"
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: Nose cone bottles
Didn't cut anything off, just started rotating it on my bench grinder until the neck was melted down and shaped.DogLover wrote:How did you get that nice smooth top??
The added plasticweld epoxy putty to fill in the gaps and finished with 2 part gorilla epoxy.
GrindMelting down the neck of the bottle on the grinder gives the epoxy a good support structure
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: Nose cone bottles
Coming along pretty good. This is after the first coat. Still need to polish and put on a Clearcoat.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Nose cone bottles
Wow, that turned out fantastic! You did a great job! That looks awesome! Do you have a photo of the nose on a rocket? That probably looks amazing!bugwubber wrote:Coming along pretty good. This is after the first coat. Still need to polish and put on a Clearcoat.
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: Nose cone bottles
:U.S. Water Rockets1 wrote:Wow, that turned out fantastic! You did a great job! That looks awesome! Do you have a photo of the nose on a rocket? That probably looks amazing!bugwubber wrote:Coming along pretty good. This is after the first coat. Still need to polish and put on a Clearcoat.
Thanks! Not too far along yet but here's a pic of the payload section.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- New Member
- Posts: 2
- Joined: Wed Aug 24, 2016 1:05 pm
Re: Nose cone bottles
Hi.
I know this is an old thread, but i have only just discovered these amazing things.
Made my first one a few weeks ago and took it camping with a load of friends and family.
Didn't know what to expect. Neither did anyone else.
It was brilliant. Now 3 others are getting into making them and making launchers.
Anyway. I have a question.
From the first picture it looks like you made up the 'Gorilla' mix and 'dripped' it on the tip
of the cone so it ran down!? Is that right? Or did you paint it on?
This is the best way to make a nosecone that i have found. I saw vid on Youtube of some guy
grinding a bottle and i did that, mine didn't turn out as well as his, but mine would be fine if
i adopted your method. It makes so much sense. i already ordered a stick of the putty.
Thanks.
I know this is an old thread, but i have only just discovered these amazing things.
Made my first one a few weeks ago and took it camping with a load of friends and family.
Didn't know what to expect. Neither did anyone else.
It was brilliant. Now 3 others are getting into making them and making launchers.
Anyway. I have a question.
From the first picture it looks like you made up the 'Gorilla' mix and 'dripped' it on the tip
of the cone so it ran down!? Is that right? Or did you paint it on?
This is the best way to make a nosecone that i have found. I saw vid on Youtube of some guy
grinding a bottle and i did that, mine didn't turn out as well as his, but mine would be fine if
i adopted your method. It makes so much sense. i already ordered a stick of the putty.
Thanks.
-
- WRA2 Member
- Posts: 116
- Joined: Fri Feb 10, 2017 9:36 am
Re: Nose cone bottles
what about this
I come from China, do not understand English, your information I use the translation software to view. I like water rockets, technology is the same, I hope we can become friends.
-
- WRA2 Member
- Posts: 116
- Joined: Fri Feb 10, 2017 9:36 am
Re: Nose cone bottles
this
- Attachments
-
- WRT040102.jpg (116.99 KiB) Viewed 59 times
I come from China, do not understand English, your information I use the translation software to view. I like water rockets, technology is the same, I hope we can become friends.
-
- WRA2 Member
- Posts: 244
- Joined: Sun May 07, 2017 2:18 pm
Re: Nose cone bottles
How was that nose cone made?China_WaterRocket wrote:this
-
- New Member
- Posts: 1
- Joined: Thu Nov 16, 2017 5:19 am
Re: Nose cone bottles
I would like to know that too.anachronist wrote: ↑Mon Jul 10, 2017 11:58 pmHow was that nose cone made?China_WaterRocket wrote:this