Page 1 of 1
List of Polyurethane Adhesives that I know
Posted: Sat Aug 13, 2016 6:20 pm
by Alien Space Agency
Well yeah, all that I know. May this be a guide for starters.
This is a list of the most commonly used glue brands on sale.
1. Loctite PL Premium (USA)
2. Gorilla Glue (USA/UK)
3. Elmer's Glue-All MAX (USA/UK/PH)
Tell me if I left out some products.
Cheers m8s
Re: List of Polyurethane Adhesives that I know
Posted: Tue Aug 16, 2016 7:56 am
by anoymous
There is one from bison, but i forgot the name
Re: List of Polyurethane Adhesives that I know
Posted: Fri Sep 02, 2016 10:31 pm
by Alien Space Agency
Not familiar with it. Sorry.
Re: List of Polyurethane Adhesives that I know
Posted: Wed Sep 07, 2016 8:38 am
by Blenderite
Here is a list of the Bison adhesives:
http://www.bison.net/en/products/632-adhesives/
Personally I have never heard of the Bison brand. Does it work as well as the PL Premium 8x?
Re: List of Polyurethane Adhesives that I know
Posted: Mon Sep 12, 2016 4:36 am
by anoymous
I don't honestly know, i never got past the single bottle rockets.
But i thought that was what discovery waterrockets (a belgian team) uses.
Re: List of Polyurethane Adhesives that I know
Posted: Fri Aug 24, 2018 4:55 pm
by sebswift
Hi. I've been using PL Premium 3X for most of my rockets. I just noticed the 8X version (Fast Grab) and I also saw a new Premium Max. Has anyone tried the Premium Max? Is it also a water cure product?
Re: List of Polyurethane Adhesives that I know
Posted: Sat Aug 25, 2018 12:57 am
by addstogether2
Hi Sebswift,
yes I am currently using Premium Max 8X version (Fast Grab).
I have had some success with this and some failures. The later to do with a poor technique which I have corrected.
It also says it it water cured.
I have also purchased some PL Premium 3X however I haven't tried it yet.
Regards Al
Re: List of Polyurethane Adhesives that I know
Posted: Sat Aug 25, 2018 12:16 pm
by sebswift
Thanks Al! I may try a comparison of the three types next time I glue up some bottles. Someone may have already done that on this forum - I'll search a bit. The 3X version has worked for me the last few years - my bottles typically fail at the ends - not the middle seam. Cheers - Dave.