Booster falling activating 2nd stage?

Discussions about rockets, construction materials, adhesives, nozzles, nosecones and fin design.
Braaainz
WRA2 Member
WRA2 Member
Posts: 32
Joined: Thu Jul 26, 2018 3:53 am

Booster falling activating 2nd stage?

Post by Braaainz »

I'm sure people must have tried this, so hoping for feedback.

Basically, boosters and primary sustainer launch. When boosters fall away, they also pull on simple cable release stager (like what is found in simple cable release launchers) thereby releasing 2nd stage

The other thought was to have booster detachment release a radial deployment mechanism that unwraps a plastic sleeve around the stager.

I haven't used multi stage or boosters before, so pardon my ignorance, just trying to think of ideas at the moment.
User avatar
anachronist
WRA2 Member
WRA2 Member
Posts: 244
Joined: Sun May 07, 2017 2:18 pm

Re: Booster falling activating 2nd stage?

Post by anachronist »

The boosters I have seen just fall away. I'm not sure the drag on them would be enough to pull anything. Also the ones I've seen fall away only because the main engine is still thrusting when the boosters run out of fuel. That is, the boosters use a regular bottle nozzle while the main engine has a smaller-diameter gardena nozzle. Admittedly I have no experience in this beyond videos I've seen.
User avatar
retrotec29
WRA2 Member
WRA2 Member
Posts: 62
Joined: Sat Jul 22, 2017 7:46 pm

Re: Booster falling activating 2nd stage?

Post by retrotec29 »

A parallel stager works much like anachronist describes. Boosters attached at the sides of the primary out preform the sustainer. That difference in thrust keeps them attached by a simple hook. Soon as the boosters are depleted they drag separate by falling away or off the hook. Designing the hook so they simply fall away is the real trick. Getting the sustainer to power through all that and beyond can be complex as well. Water rockets deplete their resources so fast all that needs to happen in couple seconds. Inline staging has all its own problems. Crush sleeves and couplers need to react fast. Most staging happens less than a second from the pad. The idea of a radial deployed Clark cable tie coupler sounds cool. The weight of the thing would be the Achilles heel of it. Using a falling away parallel booster to trip it would be a slick way not to add a servo or timer. A simple one way vale between the first second stage sustainer could safely pressurize the final stage. Complex, cool and I would love to see any part of it manifest. I will stay tuned,
No matter where you go, there you are. Buckaroo Banzai
User avatar
addstogether2
WRA2 Member
WRA2 Member
Posts: 62
Joined: Sun Mar 15, 2015 1:25 am

Re: Booster falling activating 2nd stage?

Post by addstogether2 »

Hi

George at air command rockets has examples of drop away boosters as described above to great effect.

http://www.aircommandrockets.com/howitw ... ayBoosters

regards

Al
Life is like riding a bicycle. To keep your balance you must keep moving.
"Albert Einstein"
User avatar
addstogether2
WRA2 Member
WRA2 Member
Posts: 62
Joined: Sun Mar 15, 2015 1:25 am

Re: Booster falling activating 2nd stage?

Post by addstogether2 »

Life is like riding a bicycle. To keep your balance you must keep moving.
"Albert Einstein"
User avatar
anoymous
Senior Member
Senior Member
Posts: 128
Joined: Thu Mar 19, 2015 2:52 pm

Re: Booster falling activating 2nd stage?

Post by anoymous »

adding to what anachronist said:
i wonder if it would be possible to start with a small nozzle while the boosters are thrusting, and when the boosters fall away (because only the main rocket still thrusts), it pulls away the small nozzle to get a bigger one
"Only two things are infinite, the universe and human stupidity, and I'm not sure about the former."
- Albert Einstein

Sorry for malconstructions in my sentences, I am Belgian. And I was never good at making easy sentences.