Hello, I am a middle school science teacher. The students want to build some rockets. I have tried building your standard 2 liter Coke bottle rocket. I have tried hot glue and tape to keep the wings on but they fall off after 2 launches. Any suggestions as to how I can better attach them to the bottle ? I am using 3/16" foam poster board from Staples office supply for the wings.
Thank you for ANY help/suggestions.
Wing Attachement Help
-
- WRA2 Member
- Posts: 4
- Joined: Wed Jul 20, 2011 11:17 am
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Wing Attachement Help
What type of glue are you using? A lot of glues will not stick to plastic, so the fins will peel right off. One glue that works exceptionally well is called "PL Premium Construction Adhesive". Many Water Rockets are made from multiple bottles cut and glued together with this glue and it holds hundreds of PSI pressure without coming apart, so it will hold your fins on with no trouble. In fact, you probably couldn't get them off if you wanted to!LearningRockets wrote:Hello, I am a middle school science teacher. The students want to build some rockets. I have tried building your standard 2 liter Coke bottle rocket. I have tried hot glue and tape to keep the wings on but they fall off after 2 launches. Any suggestions as to how I can better attach them to the bottle ? I am using 3/16" foam poster board from Staples office supply for the wings.
Thank you for ANY help/suggestions.
Good luck!
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 4
- Joined: Wed Jul 20, 2011 11:17 am
Re: Wing Attachement Help
Thank you very much......gonna get some,,,,
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Wing Attachement Help
It works great for household repairs too. The stuff is awesome!LearningRockets wrote:Thank you very much......gonna get some,,,,
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 4
- Joined: Wed Jul 20, 2011 11:17 am
Re: Wing Attachement Help
Got some PL. Going to take a few days to get to it though. lots of glue there so I think I am going to make a few at one time. Not to waist all the glue. Thnx for all the help. Ill get back after a test flight.
-
- Senior Member
- Posts: 183
- Joined: Wed Jul 09, 2008 5:20 am
Re: Wing Attachement Help
When working with PL premium, make sure you use some latex gloves. The stuff is difficult to get off your skin. Also make sure you work in a well ventilated area, as PL gives off potentially harmful fumes even though you can't smell them. When you're done gluing, seal the end of the tube really well to stop atmospheric moisture getting into the tube, otherwise it will set in the nozzle.LearningRockets wrote:Got some PL. Going to take a few days to get to it though. lots of glue there so I think I am going to make a few at one time. Not to waist all the glue. Thnx for all the help. Ill get back after a test flight.
http://www.AirCommandRockets.com