New Method for Removing Lables from Bottles Tutorial
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
New Method for Removing Lables from Bottles Tutorial
We have put together a new tutorial for our website discussing an alternative method for removing labels from bottles. We want to give a shout out to Tony for mentioning this method to us on our Facebook page. If you want to see the new tutorial, check out this link: http://www.uswaterrockets.com/construct ... torial.htm
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 124
- Joined: Sat Dec 15, 2012 12:12 am
Re: New Method for Removing Lables from Bottles Tutorial
Saw it. Good info there I see the benefits of both methods. Better than peel, scrape with finger nail, wipe with citrus product, and wash.
-
- WRA2 Member
- Posts: 238
- Joined: Tue Apr 07, 2009 2:36 pm
Re: New Method for Removing Lables from Bottles Tutorial
Another tip that I find useful- when it comes to scraping and wiping with solvent, put a cap with a valve stem on the bottle and pump about 20 psi into the bottle. It allows you to use a lot more elbow grease. Could use it with either of USWR's techniques, though it might not be worth the effort if you've already softened the glue significantly.
-
- WRA2 Member
- Posts: 124
- Joined: Sat Dec 15, 2012 12:12 am
Re: New Method for Removing Lables from Bottles Tutorial
That is exactly how I do it.SaskAlex wrote:Another tip that I find useful- when it comes to scraping and wiping with solvent, put a cap with a valve stem on the bottle and pump about 20 psi into the bottle. It allows you to use a lot more elbow grease.
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: New Method for Removing Lables from Bottles Tutorial
I just want to say, of all the ideas I've seen on this board so far, this has been the easiest to implement AND the most successful for me.
Thanks!
Thanks!
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 115
- Joined: Mon May 30, 2011 3:02 pm
Re: New Method for Removing Lables from Bottles Tutorial
Fortunately we don't have that problem here in the Netherlands (yet), I can just pull the labels of and all there's left is a small strip of glue which is easily removed with a cloth and a little white spirit. The label material looks the same to me but I think they use a different kind of glue here. But I'll remember this tutorial when they decide to change it!
Arjan
n-bwaterrockets.blogspot.com
n-bwaterrockets.blogspot.com
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: New Method for Removing Lables from Bottles Tutorial
bugwubber wrote:I just want to say, of all the ideas I've seen on this board so far, this has been the easiest to implement AND the most successful for me.
Thanks!
The funny thing is that we stumbled into it by accident while making another tutorial... we were washing out sticky bottles and noticed that some of the labels were able to peel off in the water. It didn't take long to figure out which ones were affected and why.
We're pleased you like the tutorial idea.
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison