Page 1 of 1

cable tie launcher with minimal tools

Posted: Sat Oct 03, 2009 2:42 pm
by andicirk
hi well i spent the day today using my webcam to document a little how to on making an Oring" cable tie launcher using materials that are readily availible here in europe within the local DIY stores

anyway i hope this helps a little and we be glad to have your feedback

im sorry its only availible in a download but i feel a little guilty about putting up 30+ pictures and text...

but if you wish to discuss certain areas of the construction i will upload that section

it is in PDF format and is here
http://andicirk.org/stuff/Wrockets%20st ... 0basic.pdf

thanks

andi

Re: cable tie launcher with minimal tools

Posted: Sat Oct 03, 2009 3:48 pm
by RaZias
Thank you very much, I take my hat off.

This is the kind of thing that every european needed.

I bet that there are more 9 mm nozzle in europe than in USA because there is shortage of material in europe.

Re: cable tie launcher with minimal tools

Posted: Tue Oct 06, 2009 12:34 pm
by andicirk
just to say if your thinking of downloading this , a friend of mine had a problem with this technique so i will be updating the pdf but wont be able to do this before friday so if you can hang on a few days........;

andi

Re: cable tie launcher with minimal tools

Posted: Wed Oct 07, 2009 2:14 pm
by andicirk
ok all the neccesary changes have been made and the pdf has been changed so go ahead and have a look....

Re: cable tie launcher with minimal tools

Posted: Fri Oct 30, 2009 8:45 am
by magenta
Thanks for making this. It will surely help me. I'll be downloading the file later.



Regards,
Magenta
Simulation pret immobilier

Re: cable tie launcher with minimal tools

Posted: Fri Oct 28, 2016 6:12 pm
by Matej
Hi, the link is not working anymore. Would someone knows a new place to download this document ?