Water Rocket Car MkXI - The Green Hornet
-
- Current WRA2 Dragster Speed & Distance Record Holder
- Posts: 232
- Joined: Wed Jul 16, 2008 8:19 am
Water Rocket Car MkXI - The Green Hornet
Hi all,
We have steadily been making progress on our new water rocket car design. I have uploaded some pics and a writeup tonight to our website for those interested
http://wrocket.hampson.net.au/?p=1065
This version has a new rear end and fin design as well as being put on a pretty big diet to weigh about 45% less than the previous version of the car.
We are looking forward to trying it out in the next few weeks.
We are also working on a second nozzle / air amplifier which will sit behind the main nozzle. We will post some pics when we have done some initial testing.
I have added some pics here as well
-todd-
We have steadily been making progress on our new water rocket car design. I have uploaded some pics and a writeup tonight to our website for those interested
http://wrocket.hampson.net.au/?p=1065
This version has a new rear end and fin design as well as being put on a pretty big diet to weigh about 45% less than the previous version of the car.
We are looking forward to trying it out in the next few weeks.
We are also working on a second nozzle / air amplifier which will sit behind the main nozzle. We will post some pics when we have done some initial testing.
I have added some pics here as well
-todd-
HHWRSA
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Water Rocket Car MkXI - The Green Hornet
It´s good that someone is giving some steps in WR-cars.
It´s that wood made ?
The wheels have no rubber...with the high-speed rooling it will surely damage the wheels...
Are they still radio-controlled ?
The diagonal wings give better handling ?
It´s that wood made ?
The wheels have no rubber...with the high-speed rooling it will surely damage the wheels...
Are they still radio-controlled ?
The diagonal wings give better handling ?
Research and Development is the soul of WR
-
- WRA2 Member
- Posts: 871
- Joined: Wed Jan 31, 2007 1:44 am
Re: Water Rocket Car MkXI - The Green Hornet
Todd,
That's a sweet ride you got there! I don't get the wheels with no rubber on them though. I think it would hurt the ability to roll on anything but a perfectly smooth surface like a tennis court or interior hallway.
That's a sweet ride you got there! I don't get the wheels with no rubber on them though. I think it would hurt the ability to roll on anything but a perfectly smooth surface like a tennis court or interior hallway.
Tim Chen
Captain, Team Enterprise
Captain, Team Enterprise
-
- WRA2 Member
- Posts: 496
- Joined: Fri Feb 08, 2008 6:02 am
Re: Water Rocket Car MkXI - The Green Hornet
Looks Good!
the V-tale is lighter than vertical and horizontal stabilizers (sometimes) but the main advantage is that a vertical fin could get in the way of the exhaust where a V-tale wouldn't.
my question is, why do you have lots of space behind the nozzle?
i like the green!
the V-tale is lighter than vertical and horizontal stabilizers (sometimes) but the main advantage is that a vertical fin could get in the way of the exhaust where a V-tale wouldn't.
The wheels have no rubber...with the high-speed rooling it will surely damage the wheels...
Todd is probably yet to put the wheel tread on.I don't get the wheels with no rubber on them though.
my question is, why do you have lots of space behind the nozzle?
i like the green!
Ascender Water Rockets
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
-
- Current WRA2 Dragster Speed & Distance Record Holder
- Posts: 232
- Joined: Wed Jul 16, 2008 8:19 am
Re: Water Rocket Car MkXI - The Green Hornet
H Razias,
Yes chassis is plywood.
The rear wheels are quite strong plastic, un-powered test runs have held up with no damage. I expect some scuffing of the rims but not much else.
Diagonal fins are positioned to allow exhaust plume to go straight between them without hitting a vertical stabilizer. Do they give better handling ? I will let you know once I have tested it
-todd-
Yes chassis is plywood.
The rear wheels are quite strong plastic, un-powered test runs have held up with no damage. I expect some scuffing of the rims but not much else.
Diagonal fins are positioned to allow exhaust plume to go straight between them without hitting a vertical stabilizer. Do they give better handling ? I will let you know once I have tested it
-todd-
HHWRSA
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
-
- Current WRA2 Dragster Speed & Distance Record Holder
- Posts: 232
- Joined: Wed Jul 16, 2008 8:19 am
Re: Water Rocket Car MkXI - The Green Hornet
Hi Tim,
Thanks for the clapping hands ;)
To answer your question, the lack of rubber tread on the rear wheels is deliberate. They roll just fine in this configuration, as well as they do with the rubber on them. The wear of the plastic (which is quite hard, not brittle) is the only concern, they will scuff up a bit when they roll on the asphalt road but I dont believe they will chip at all. Unpowered tests on roughish concrete so far are good. Also my wife probably wont appreciate me launching down the hallway and embedding the car in the drywall
The rear wheels have minimum friction with the road as I am trying to get this car to act more like a rocket than a car. My tests up until now were trying to get as much grip and down-force over the back wheels as possible to control the thrust steering problem we were having. I believe putting the nozzle well ahead of the rear wheels was a better solution to that problem. So now what I am trying to do it get the rear of the car to straighten like the rear of a rocket does when it flies vertically.
If the rear of the car get out of alignment with the front at speed, the air going past the car will hit the fins and try to push them back into line with the front. The force needed to do that will need to be enough to overcome the friction of the rear wheels and push them (plus the rear of the car) sideways on the road. With rubber on the rear wheels the friction between the road the the wheels is high, with no rubber and just plastic it is a lot lower, so the amount of force required to straighten the rear of the car should then be lower. This is my logic.
Whether the fins I have put on are big enough and the car is going fast enough to generate enough force to overcome this rear wheel friction I am not sure, we will have to take it to the test track to find out. This car is also a lot lighter than the last, and we are concurrently working on a new 3 x 2L reinforced bottle set to slide onto this chassis to generate more thrust ..
Should be interesting to see what results we get
cya
-todd-
Thanks for the clapping hands ;)
To answer your question, the lack of rubber tread on the rear wheels is deliberate. They roll just fine in this configuration, as well as they do with the rubber on them. The wear of the plastic (which is quite hard, not brittle) is the only concern, they will scuff up a bit when they roll on the asphalt road but I dont believe they will chip at all. Unpowered tests on roughish concrete so far are good. Also my wife probably wont appreciate me launching down the hallway and embedding the car in the drywall
The rear wheels have minimum friction with the road as I am trying to get this car to act more like a rocket than a car. My tests up until now were trying to get as much grip and down-force over the back wheels as possible to control the thrust steering problem we were having. I believe putting the nozzle well ahead of the rear wheels was a better solution to that problem. So now what I am trying to do it get the rear of the car to straighten like the rear of a rocket does when it flies vertically.
If the rear of the car get out of alignment with the front at speed, the air going past the car will hit the fins and try to push them back into line with the front. The force needed to do that will need to be enough to overcome the friction of the rear wheels and push them (plus the rear of the car) sideways on the road. With rubber on the rear wheels the friction between the road the the wheels is high, with no rubber and just plastic it is a lot lower, so the amount of force required to straighten the rear of the car should then be lower. This is my logic.
Whether the fins I have put on are big enough and the car is going fast enough to generate enough force to overcome this rear wheel friction I am not sure, we will have to take it to the test track to find out. This car is also a lot lighter than the last, and we are concurrently working on a new 3 x 2L reinforced bottle set to slide onto this chassis to generate more thrust ..
Should be interesting to see what results we get
cya
-todd-
HHWRSA
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
-
- Current WRA2 Dragster Speed & Distance Record Holder
- Posts: 232
- Joined: Wed Jul 16, 2008 8:19 am
Re: Water Rocket Car MkXI - The Green Hornet
Hi Brian,
the area behind the nozzle is for an experimental device I am working on which is like a second nozzle or an air amplifier, I am attempting to draw in additional air moving past the rocket car into the exhaust plume.
I have a couple of designs I am working on. They will be removable so I can test different configurations.
-todd-
the area behind the nozzle is for an experimental device I am working on which is like a second nozzle or an air amplifier, I am attempting to draw in additional air moving past the rocket car into the exhaust plume.
I have a couple of designs I am working on. They will be removable so I can test different configurations.
-todd-
HHWRSA
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
Hornsby Heights Water Rocket Space Agency
http://wrocket.hampson.net.au
-
- WRA2 Member
- Posts: 496
- Joined: Fri Feb 08, 2008 6:02 am
Re: Water Rocket Car MkXI - The Green Hornet
sounds interesting, here's a link to a small discussion which way help http://www.wra2.org/forum/viewtopic.php ... nted#p2468
Ascender Water Rockets
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Water Rocket Car MkXI - The Green Hornet
Todd,
It would be a pretty remarkable achievement if you can show that air amplifier nozzle concept works. It is an interesting idea. Good luck with the testing!
It would be a pretty remarkable achievement if you can show that air amplifier nozzle concept works. It is an interesting idea. Good luck with the testing!
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Water Rocket Car MkXI - The Green Hornet
I have talked of that air-amplified concept in following the post:
http://www.wra2.org/forum/viewtopic.php ... nted#p2468
It´s a concept called "air-augmented rocket" I saw at Wikipedia:
http://en.wikipedia.org/wiki/Air-augmented_rocket I don´t know the drag it would creat but I have a concept diferent from this one.
Imagine you put a inverted air-plane wing right behind the nozzle, the fast air escaping from the nozzle by passing by the wing will creat a strong downforce that would even stick the rocket to the ground...but the problem would be the instability.
http://www.wra2.org/forum/viewtopic.php ... nted#p2468
It´s a concept called "air-augmented rocket" I saw at Wikipedia:
http://en.wikipedia.org/wiki/Air-augmented_rocket I don´t know the drag it would creat but I have a concept diferent from this one.
Imagine you put a inverted air-plane wing right behind the nozzle, the fast air escaping from the nozzle by passing by the wing will creat a strong downforce that would even stick the rocket to the ground...but the problem would be the instability.
Research and Development is the soul of WR
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Water Rocket Car MkXI - The Green Hornet
Even the down-side of the all chassis could be like in a inverted wing structure.
Research and Development is the soul of WR
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Water Rocket Car MkXI - The Green Hornet
Thampson,
You said that you have reinforced your bottles and they can hold 180 psi, could you show some photos ?
How did you reinforced the bottles ? (I am talking of the How To)
You said that you have reinforced your bottles and they can hold 180 psi, could you show some photos ?
How did you reinforced the bottles ? (I am talking of the How To)
Research and Development is the soul of WR
-
- WRA2 Member
- Posts: 681
- Joined: Sat Feb 24, 2007 11:06 am
Re: Water Rocket Car MkXI - The Green Hornet
RaZias wrote:The air expeled by the bottle by passing by the inverted wing would create a high down-force to stabilize the rocket during the kick-phase (technically it would be like a kick).
Even the down-side of the all chassis could be like in a inverted wing structure.
I think the wing behind the nozzle idea is just extra work that could be accomplished much easier. For example, a second nozzle on the bottle pointing upwards would generate any amount of downforce you needed. The same could also be accomplished by angling the nozzle up, then creating a down going thrust angle and downforce.
Spaceman Spiff
"What goes up, must come down"
"What goes up, must come down"
-
- WRA2 Member
- Posts: 681
- Joined: Sat Feb 24, 2007 11:06 am
Re: Water Rocket Car MkXI - The Green Hornet
On a different but related subject, has anyone tried making a water rocket powered hovercraft? Todds work to eliminate drag could be augmented by using a skirt and compressed air to get the car to hover and it would have almost zero friction.
Spaceman Spiff
"What goes up, must come down"
"What goes up, must come down"
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Water Rocket Car MkXI - The Green Hornet
A WR-Hover-craft would demand a complex system because how would you put air below the skirt ?
I have no idea how they do that in a real hover-craft...
For that matter it would be better to make as Anti-gravity...they just putted 3 ski pads below the rocket made of the same blue thing they use in their wings for their comercial WR.
But making a WR-tobogan is not as fun as a WR-car, the last one really demands the principle of this forum: technological challenges that releases the scientists one all of us
I have no idea how they do that in a real hover-craft...
For that matter it would be better to make as Anti-gravity...they just putted 3 ski pads below the rocket made of the same blue thing they use in their wings for their comercial WR.
But making a WR-tobogan is not as fun as a WR-car, the last one really demands the principle of this forum: technological challenges that releases the scientists one all of us
Research and Development is the soul of WR