competition for water rocket cars.

Discussions about rockets, construction materials, adhesives, nozzles, nosecones and fin design.
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

competition for water rocket cars.

Post by RaZias »

I know that it´s usual to see sites of water-rocket-cars.

So I was wondering in maybe making a competition class for it.
It could compete in speed since it´s hard to find a flat zone lenght enough to test it in a lenght competition.
Research and Development is the soul of WR
User avatar
Spaceman Spiff
WRA2 Member
WRA2 Member
Posts: 681
Joined: Sat Feb 24, 2007 11:06 am

Re: competition for water rocket cars.

Post by Spaceman Spiff »

RaZias wrote:I know that it´s usual to see sites of water-rocket-cars.

So I was wondering in maybe making a competition class for it.
It could compete in speed since it´s hard to find a flat zone lenght enough to test it in a lenght competition.
That's an interesting idea. Are you talking about cars that people would ride in or do you mean small model cars? There would need to be a lot of rules created for this. Are there any people doing a contest like this already? How is it usually measured?
Spaceman Spiff
"What goes up, must come down"
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

I am talking about small models, since the real ones are dangerous.
They could be sticked to the ground if inserted inverted wings like the F1 cars.

Anyway one day someone is going to seat in a skate with 2 rockets at each side.
This is the only viable model of riding one.
Research and Development is the soul of WR
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

To make the wheels for a bottle it would be better to use wheels from Lego.

First it would be necessary to make a chasis in Lego.
Maybe the pieces could be glued to make it stiffer.
After that the rocket would be attached to the chasis.

Then wings like the F1 cars would be glued.
Research and Development is the soul of WR
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

Research and Development is the soul of WR
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

Some indications about making a water-car:

1. Fins will not help much for initial stability,
since the speed of the car is still low during this phase.
2. Better is a launch tube or a similar type of initial guidance.
3. Two slats, one on each side of the car during say the first 2-3 meters.
4. Mount the bottle slightly upward on the chassis to increase surface friction during the period of highest acceleration.
Research and Development is the soul of WR
User avatar
Spaceman Spiff
WRA2 Member
WRA2 Member
Posts: 681
Joined: Sat Feb 24, 2007 11:06 am

Re: competition for water rocket cars.

Post by Spaceman Spiff »

RaZias wrote:Some indications about making a water-car:

1. Fins will not help much for initial stability,
since the speed of the car is still low during this phase.
2. Better is a launch tube or a similar type of initial guidance.
3. Two slats, one on each side of the car during say the first 2-3 meters.
4. Mount the bottle slightly upward on the chassis to increase surface friction during the period of highest acceleration.
I remember having a water rocket powered car when I was a kid. I wish I remember what they were called. It was one of the coolest toys I ever got. I remember they worked well in our basement because the floor was concrete but the asphalt roads were too rough and it would not roll far. I think we eventually figured out that more pressure was the way to go farther and we would up ruining the thing by pumping it too much.
Spaceman Spiff
"What goes up, must come down"
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

Here are 2 toys avaiable in USA



Research and Development is the soul of WR
User avatar
Tim Chen
WRA2 Member
WRA2 Member
Posts: 871
Joined: Wed Jan 31, 2007 1:44 am

Re: competition for water rocket cars.

Post by Tim Chen »

RaZias wrote:Here are 2 toys avaiable in USA



Good find. I think I know what my little cousins are getting for Christmas this year!
Tim Chen
Captain, Team Enterprise
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

Check this youtube videos

[youtube][/youtube]

[youtube][/youtube]

[youtube][/youtube]

[youtube][/youtube]
Research and Development is the soul of WR
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

This is a computarized make-off of the new world record of terrain speed in a car.

[youtube][/youtube]
Research and Development is the soul of WR
User avatar
Tim Chen
WRA2 Member
WRA2 Member
Posts: 871
Joined: Wed Jan 31, 2007 1:44 am

Re: competition for water rocket cars.

Post by Tim Chen »

The big one with the carriage wheels looks like it would have really done well. I think if it didn't hit the dirt it would have gone into the parling lot and smacked into the white car!
Tim Chen
Captain, Team Enterprise
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

I think it would be cool to make a 200psi FTC water-car with the front wheels controled by a system taken from a telecommanded toy car.

One thing about the wheels, if they aren´t from rubber it can be glued a layer of a bike tire or air chamber from a bike wheel, who knows maybe even foam.

The FTC would need to be vertical or diagonal so the water would be more effective.

A horizontal tube should be attached in the bottom of the FTC to direct the air more effectively.

A field to fire this cars would be in great in a stadium for runs like 200 meters or something.

If fired in dirt maybe the wheels should be a thin circle of metal like a blade, less drag.
Research and Development is the soul of WR
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: competition for water rocket cars.

Post by RaZias »

Research and Development is the soul of WR
User avatar
Brian
WRA2 Member
WRA2 Member
Posts: 496
Joined: Fri Feb 08, 2008 6:02 am

Re: competition for water rocket cars.

Post by Brian »

if the rocket's horizontal you'd have a short air pulse until gravity pushes the water to the nozzle.
i don't really feel like making a water rocket car, i want to build a Surface Effect Vehicle. would they be aloud. (there a ground relient vehicle)
Ascender Water Rockets
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w