MD 80 Clone Ordered!!!

Discussion about deployment systems including altimeters, timers, air speed flaps, servo systems, and chemical reactions.
User avatar
Blenderite
WRA2 Member
WRA2 Member
Posts: 442
Joined: Mon Apr 09, 2012 3:49 pm

MD 80 Clone Ordered!!!

Post by Blenderite »

I finally ordered 2-MD80 cameras yesterday, along with 2-micro SD cards, from Ebay. The cameras should arrive around the end of the month. The cards are probably going to arrive next week. Too bad all the MD80's come from Hong Kong :( :( :( :(

-DogLover
-Blenderite

Check out my YouTube channel: https://www.youtube.com/c/Blenderite

"Get it right, then go for GREATNESS!"
joesf
WRA2 Member
WRA2 Member
Posts: 4
Joined: Thu Jul 19, 2012 9:43 am

Re: MD 80 Clone Ordered!!!

Post by joesf »

http://pages.ebay.com/link/?nav=item.vi ... 0865845102 they seem to be shipping from the U.S. also what is the weight on these cameras and are you stripping the casings off and just permanently attaching the unit or using it as a whole...also why this unit and not the ones you see people using that looks like a key chain
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: MD 80 Clone Ordered!!!

Post by U.S. Water Rockets »

joesf wrote:http://pages.ebay.com/link/?nav=item.vi ... 0865845102 they seem to be shipping from the U.S. also what is the weight on these cameras and are you stripping the casings off and just permanently attaching the unit or using it as a whole...also why this unit and not the ones you see people using that looks like a key chain
That one looks the way it does because it is meant to fool people into thinking it is a camera sold under the name "MD-80" which looks almost the same as this one. The keychain cameras are meant to look like a key fob for a car so they can be used as a spy camera to covertly record stuff without looking like you are holding a camera.
User avatar
Blenderite
WRA2 Member
WRA2 Member
Posts: 442
Joined: Mon Apr 09, 2012 3:49 pm

Re: MD 80 Clone Ordered!!!

Post by Blenderite »

joesf wrote:http://pages.ebay.com/link/?nav=item.vi ... 0865845102 they seem to be shipping from the U.S. also what is the weight on these cameras and are you stripping the casings off and just permanently attaching the unit or using it as a whole...also why this unit and not the ones you see people using that looks like a key chain
Snap!!!! I didn't even see that one!!!! Excuse me while I bonk myself on the head!!! Anyway, I am going to mount it like it is. It is the size of a thumb according to the info in the listing, it is less than 1/2 an ounce. Here is the listing I purchased it from:
http://www.ebay.com/itm/Mini-DV-DVR-Spo ... 2ebe4fa5b6

I chose the MD80 because it is way cheaper than the key chain cameras. I can't wait till they arrive.

-DogLover
-Blenderite

Check out my YouTube channel: https://www.youtube.com/c/Blenderite

"Get it right, then go for GREATNESS!"
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: MD 80 Clone Ordered!!!

Post by U.S. Water Rockets1 »

DogLover wrote:
joesf wrote:http://pages.ebay.com/link/?nav=item.vi ... 0865845102 they seem to be shipping from the U.S. also what is the weight on these cameras and are you stripping the casings off and just permanently attaching the unit or using it as a whole...also why this unit and not the ones you see people using that looks like a key chain
Snap!!!! I didn't even see that one!!!! Excuse me while I bonk myself on the head!!! Anyway, I am going to mount it like it is. It is the size of a thumb according to the info in the listing, it is less than 1/2 an ounce. Here is the listing I purchased it from:
http://www.ebay.com/itm/Mini-DV-DVR-Spo ... 2ebe4fa5b6

I chose the MD80 because it is way cheaper than the key chain cameras. I can't wait till they arrive.

-DogLover
The keychain cameras have been updated a few times and are capable of HD720P video. The MD80 clones were never updated, so they do 640x480 resolution. That's why they cost so much less. An advantage of the MD80 is that the lens is on the face and not on the end, so it will fit in an FTC rocket and still look out the side. The Keychain camera must be modified so that it will look out of an FTC.
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
User avatar
Blenderite
WRA2 Member
WRA2 Member
Posts: 442
Joined: Mon Apr 09, 2012 3:49 pm

Re: MD 80 Clone Ordered!!!

Post by Blenderite »

Right now, I can't afford a better quality camera. If I had the money for a more expensive camera, I would put it toward a scuba tank!!! But I don't. Personally I am going to be satisfied with the 720x480 video. Another reason why I liked the MD80 is because it is side facing. I though that would be easier to install in the rocket. Anyway, still waiting for a tracking number, so I don't expect that the 7 - 10 days that the listing says is going to happen.

-DogLover
-Blenderite

Check out my YouTube channel: https://www.youtube.com/c/Blenderite

"Get it right, then go for GREATNESS!"
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: MD 80 Clone Ordered!!!

Post by U.S. Water Rockets1 »

DogLover wrote:Right now, I can't afford a better quality camera. If I had the money for a more expensive camera, I would put it toward a scuba tank!!! But I don't. Personally I am going to be satisfied with the 720x480 video. Another reason why I liked the MD80 is because it is side facing. I though that would be easier to install in the rocket. Anyway, still waiting for a tracking number, so I don't expect that the 7 - 10 days that the listing says is going to happen.

-DogLover
Sadly, the MD80 clone fakes 720x480 by taking 640x480 video and stretching it. If you look carefully you will see circles are elliptical in shape in the video shot with that camera. Still, the price is unbeatable.
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison