ServoChron Instructions
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
ServoChron Instructions
I know I am asking alot, but I am trying to build the servo chron and I am a bit confused. Can someone post links to EVERY part required in building this thing and make sure the links are good but only us amazon and ebay. I do have a soldering iron, solder, and a wire stripper that I own. I also need asembly instructions that are not written down on USWR but that someone here explains.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Please give me the links of everything and it can't be on Ti's website. Everything must cost less than $20. Should be easy since you said it would!
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Guys this is what I got for the parts it came to $48.66 and I really can't afford that much. Here are the links. I don't want to order outside North America.
http://www.ebay.com/itm/1x-MG90S-Metal- ... 20ddce2a51
http://www.ebay.com/itm/Parkzone-PKZ305 ... 4d132c7efa
http://www.ebay.com/itm/Multicomp-Switc ... 19e726611c
http://www.ebay.com/itm/6-Servo-Extensi ... 3373e0a37d
http://www.ebay.com/itm/1x-MG90S-Metal- ... 20ddce2a51
http://www.ebay.com/itm/Parkzone-PKZ305 ... 4d132c7efa
http://www.ebay.com/itm/Multicomp-Switc ... 19e726611c
http://www.ebay.com/itm/6-Servo-Extensi ... 3373e0a37d
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
There is no reason to buy from anyone other than TI
https://estore.ti.com/MSP-EXP430G2-MSP4 ... P2031.aspx
Hobbyking.com USA warehouse for most everything else.
Do you already have a charger? If not you may just want to go with 9V battery.
Ditch the switch. Use wires or make your own inertia switch.
While I have a functioning servochron module, I have yet to launch it.
Bugwubber
https://estore.ti.com/MSP-EXP430G2-MSP4 ... P2031.aspx
Hobbyking.com USA warehouse for most everything else.
Do you already have a charger? If not you may just want to go with 9V battery.
Ditch the switch. Use wires or make your own inertia switch.
While I have a functioning servochron module, I have yet to launch it.
Bugwubber
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Do you think I should just solder it. I already have a battery and charger from a Parkzone plane and blade helis. The intertia switch is a good idea I can make that myself. I already got a idea and I am kind of techy that way.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
Solder what the batteries? No the plugs are worth it.Water Rocket Expert wrote:Do you think I should just solder it. I already have a battery and charger from a Parkzone plane and blade helis. The intertia switch is a good idea I can make that myself. I already got a idea and I am kind of techy that way.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Okay so I should buy the board, not the switch, buy the two connectors, not the battery or charger, and buy the servo. Okay I will purchase from Ti for like $10.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
Not much need for metal gears. There's just not enough stress to justify.. Your servo need only cost $2-$3.Water Rocket Expert wrote:Okay so I should buy the board, not the switch, buy the two connectors, not the battery or charger, and buy the servo. Okay I will purchase from Ti for like $10.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Like this one http://www.ebay.com/itm/micro-servo-mot ... 4860497689bugwubber wrote:Not much need for metal gears. There's just not enough stress to justify.. Your servo need only cost $2-$3.Water Rocket Expert wrote:Okay so I should buy the board, not the switch, buy the two connectors, not the battery or charger, and buy the servo. Okay I will purchase from Ti for like $10.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
Looks similar to this one which is what I got-Water Rocket Expert wrote:Like this one http://www.ebay.com/itm/micro-servo-mot ... 4860497689bugwubber wrote:Not much need for metal gears. There's just not enough stress to justify.. Your servo need only cost $2-$3.Water Rocket Expert wrote:Okay so I should buy the board, not the switch, buy the two connectors, not the battery or charger, and buy the servo. Okay I will purchase from Ti for like $10.
http://hobbyking.com/hobbyking/store/__ ... ouse_.html
There are smaller ones that work but the the cost starts going up. Just pay attention to the voltage and make sure you get a servo that will work on 3V.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
I think I will have to go with TI to get the $10 price, but the reason I refuse to order from other companies besides Amazon and eBay, is that I don't know how long shipping will take, I usually have to give a credit card number to purchase, meaning if they were dishonest they could steal it, and it's just a lot of trouble. As for now, $10 is a lot of trouble when Amazon is selling it for $19.50 with $2 shipping. Is the one in the link I put good? It is 3.0-7.2 volts and the stall torque is 17.5oz/in. at 4.8 volts?
I appreciate this discussion.
I appreciate this discussion.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
Yeah the description indicates it should work. $4 with free shipping is a good price.Water Rocket Expert wrote:I think I will have to go with TI to get the $10 price, but the reason I refuse to order from other companies besides Amazon and eBay, is that I don't know how long shipping will take, I usually have to give a credit card number to purchase, meaning if they were dishonest they could steal it, and it's just a lot of trouble. As for now, $10 is a lot of trouble when Amazon is selling it for $19.50 with $2 shipping. Is the one in the link I put good? It is 3.0-7.2 volts and the stall torque is 17.5oz/in. at 4.8 volts?
I appreciate this discussion.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Thanks. I needed to here that. How much pressure did the X-12 use?bugwubber wrote:Yeah the description indicates it should work. $4 with free shipping is a good price.Water Rocket Expert wrote:I think I will have to go with TI to get the $10 price, but the reason I refuse to order from other companies besides Amazon and eBay, is that I don't know how long shipping will take, I usually have to give a credit card number to purchase, meaning if they were dishonest they could steal it, and it's just a lot of trouble. As for now, $10 is a lot of trouble when Amazon is selling it for $19.50 with $2 shipping. Is the one in the link I put good? It is 3.0-7.2 volts and the stall torque is 17.5oz/in. at 4.8 volts?
I appreciate this discussion.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
-
- WRA2 Member
- Posts: 1087
- Joined: Wed Dec 19, 2012 2:47 am
Re: ServoChron Instructions
Just enough I'd say.Water Rocket Expert wrote:Thanks. I needed to here that. How much pressure did the X-12 use?bugwubber wrote:Yeah the description indicates it should work. $4 with free shipping is a good price.Water Rocket Expert wrote:I think I will have to go with TI to get the $10 price, but the reason I refuse to order from other companies besides Amazon and eBay, is that I don't know how long shipping will take, I usually have to give a credit card number to purchase, meaning if they were dishonest they could steal it, and it's just a lot of trouble. As for now, $10 is a lot of trouble when Amazon is selling it for $19.50 with $2 shipping. Is the one in the link I put good? It is 3.0-7.2 volts and the stall torque is 17.5oz/in. at 4.8 volts?
I appreciate this discussion.
Bugwubber
Team S.P.E.W.
Team S.P.E.W.
-
- WRA2 Member
- Posts: 622
- Joined: Fri Nov 22, 2013 10:39 am
Re: ServoChron Instructions
Well is that 180 psi or 400? Stop playing games. I am typing with a wounded finger.
Water Rocket Expert
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein
I'm 20
Maryland
"Anyone who has never made a mistake has never tried anything new." -Albert Einstein