Old Timer
-
- WRA2 Member
- Posts: 10
- Joined: Fri Feb 10, 2012 9:55 pm
Old Timer
It's so nice to see how far water rocketry has come in the last
15 years. I have been out of the sport for so long now that
Cliff Heath, Bruce Berrgren, Dean Wheeler , and some of the other
old timers just seem to have moved on. In their place , I see some
real talent. I can see that it will take me a while to get back up to
speed what with all of the posts and technology here on the
Water Rocket Forum.
Bob K
15 years. I have been out of the sport for so long now that
Cliff Heath, Bruce Berrgren, Dean Wheeler , and some of the other
old timers just seem to have moved on. In their place , I see some
real talent. I can see that it will take me a while to get back up to
speed what with all of the posts and technology here on the
Water Rocket Forum.
Bob K
-
- Site Admin
- Posts: 1089
- Joined: Sat Dec 30, 2006 11:30 pm
Re: Old Timer
Welcome to the forum and the WRA2 Bob,Rocket Bob wrote:It's so nice to see how far water rocketry has come in the last
15 years. I have been out of the sport for so long now that
Cliff Heath, Bruce Berrgren, Dean Wheeler , and some of the other
old timers just seem to have moved on. In their place , I see some
real talent. I can see that it will take me a while to get back up to
speed what with all of the posts and technology here on the
Water Rocket Forum.
Bob K
You have a lot of catching up to do
Lisa Walker,
Forum Administrator.
The Water Rocket Achievement World Record Association
Forum Administrator.
The Water Rocket Achievement World Record Association
-
- WRA2 Member
- Posts: 681
- Joined: Sat Feb 24, 2007 11:06 am
Re: Old Timer
Welcome to the forum, Bob! Technology has really changed the hobby over the past few years. They have decent cameras that can take video from a rocket that are under $15 bucks and weigh under 20 grams. I think that being able to fly cameras easily and cheaply has really gotten tons of people interested.Rocket Bob wrote:It's so nice to see how far water rocketry has come in the last
15 years. I have been out of the sport for so long now that
Cliff Heath, Bruce Berrgren, Dean Wheeler , and some of the other
old timers just seem to have moved on. In their place , I see some
real talent. I can see that it will take me a while to get back up to
speed what with all of the posts and technology here on the
Water Rocket Forum.
Bob K
Spaceman Spiff
"What goes up, must come down"
"What goes up, must come down"
-
- WRA2 Member
- Posts: 496
- Joined: Fri Feb 08, 2008 6:02 am
Re: Old Timer
Welcome back!
Ascender Water Rockets
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
http://ascenderwaterrockets.weebly.com/
https://www.youtube.com/channel/UCS2NHXS-VFxEux70DCINR0w
-
- WRA2 Member
- Posts: 10
- Joined: Fri Feb 10, 2012 9:55 pm
Re: Old Timer
Thank you ! Perhaps I can contribute with some experimental
results from "the old days".
Bob K
results from "the old days".
Bob K
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Old Timer
Hi Bob. Welcome back to water rockets!Rocket Bob wrote:Thank you ! Perhaps I can contribute with some experimental
results from "the old days".
Bob K
How far back are you talking about when you were active? One thing that we have been trying to uncover is the pressure capacity of those old style PET bottles with the separate plastic base and no "feet". Were you launching those types of bottles back in the day?
Of course we don't know what we don't know, so any information you have to share about anything would be very cool.
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- WRA2 Member
- Posts: 10
- Joined: Fri Feb 10, 2012 9:55 pm
Re: Old Timer
That is old time ,now. I remember using them at 100psi only.
I do not have any rupture strength data on the old style
2 liter bottles.
Bob K
I do not have any rupture strength data on the old style
2 liter bottles.
Bob K
-
- WRA2 Member
- Posts: 10
- Joined: Fri Feb 10, 2012 9:55 pm
Re: Old Timer
http://polyplex.org/rockets/other/rocket_bob/
Here's all thats left of my old days, hosted by Cliff Heath.
Bob K
Here's all thats left of my old days, hosted by Cliff Heath.
Bob K
-
- Advanced Member
- Posts: 31
- Joined: Fri Jan 13, 2012 5:16 pm
Re: Old Timer
Those rockets don't look bad
Welcome back.
Welcome back.
-
- WRA2 Member
- Posts: 1778
- Joined: Sat Feb 03, 2007 3:24 pm
Re: Old Timer
It's a shame nobody recorded that info. Those bottles were quite a bit heavier and we think that would make them stronger. Then again, the plastic may not have been as well made back then so they may have needed to be thicker to hold the same pressure.Rocket Bob wrote:That is old time ,now. I remember using them at 100psi only.
I do not have any rupture strength data on the old style
2 liter bottles.
Bob K
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
-
- New Member
- Posts: 4
- Joined: Wed Feb 11, 2009 5:14 pm
Re: Old Timer
From one old timer to another. I got started back in 1997. Been that long ago already. Needed a hands on science project for high school students. Couldn't buy a launcher, so I made one. I couldn't get the Clark Cable Tie launcher to work and it was too difficult to make, so I started working on end-seal launch pads. Now I use the internal o-ring but I found the secret to making it work, use a bottle reamer. So I make bottle reamers for my launch pads.
I still don't have a low cost, 100%, parachute deployment mechanism. I hope someday to build a better one. That is another subject.
Got connected with scouts and I've been providing launch pads ever since. I think I've sold over 400 launch pads of various designs over the years.
I keep adding content to my website and youtube channel.
Mike Passerotti
WaterRocketPop.com
I still don't have a low cost, 100%, parachute deployment mechanism. I hope someday to build a better one. That is another subject.
Got connected with scouts and I've been providing launch pads ever since. I think I've sold over 400 launch pads of various designs over the years.
I keep adding content to my website and youtube channel.
Mike Passerotti
WaterRocketPop.com
Mike
-
- Site Admin
- Posts: 1089
- Joined: Sat Dec 30, 2006 11:30 pm
Re: Old Timer
Hi Mike,mikepasserotti wrote:From one old timer to another. I got started back in 1997. Been that long ago already. Needed a hands on science project for high school students. Couldn't buy a launcher, so I made one. I couldn't get the Clark Cable Tie launcher to work and it was too difficult to make, so I started working on end-seal launch pads. Now I use the internal o-ring but I found the secret to making it work, use a bottle reamer. So I make bottle reamers for my launch pads.
I still don't have a low cost, 100%, parachute deployment mechanism. I hope someday to build a better one. That is another subject.
Got connected with scouts and I've been providing launch pads ever since. I think I've sold over 400 launch pads of various designs over the years.
I keep adding content to my website and youtube channel.
Mike Passerotti
WaterRocketPop.com
Welcome to the forum
Feel free to post links to any content you have on your site.
Lisa Walker,
Forum Administrator.
The Water Rocket Achievement World Record Association
Forum Administrator.
The Water Rocket Achievement World Record Association