Jumpstarter Air Compressor

Discussion about Compressors, hose, pipes, fittings, launchers, release mechanisms, and launch tubes.
Post Reply
sletts02
New Member
Posts: 13
Joined: Mon Jul 07, 2014 11:58 pm

Jumpstarter Air Compressor

Post by sletts02 » Mon Jul 28, 2014 2:55 am

Has anyone tried using a jumpstarter air compressor? They say they can reach 260psi but I have my doubts.

Something like this:

http://www.jaycar.com.au/productView.asp?ID=MB3694

https://www.jbhifi.com.au/gps-car-audio ... sor/98768/

http://www.autobarn.com.au/electus-5-in ... ght-mb3594

It seems like it would solve the compressing and the lack of power source.



User avatar
Blenderite
WRA2 Member
WRA2 Member
Posts: 442
Joined: Mon Apr 09, 2012 3:49 pm

Re: Jumpstarter Air Compressor

Post by Blenderite » Mon Jul 28, 2014 7:35 pm

Hmm, that would be interesting. Give it a try. One word of caution: I would never recommend that you go past 75% of the rated pressure, just to be safe.


-Blenderite

Check out my YouTube channel: https://www.youtube.com/c/Blenderite

"Get it right, then go for GREATNESS!"

User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1773
Joined: Sat Feb 03, 2007 3:24 pm

Re: Jumpstarter Air Compressor

Post by U.S. Water Rockets1 » Sat Aug 02, 2014 10:45 pm

DogLover wrote:Hmm, that would be interesting. Give it a try. One word of caution: I would never recommend that you go past 75% of the rated pressure, just to be safe.
The biggest enemy of the compressor is HEAT. Make sure you allow time for the compressor to cool off, or add some active cooling to it so it does not overheat. If it gets too hot, it will fail.


Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison

User avatar
Blenderite
WRA2 Member
WRA2 Member
Posts: 442
Joined: Mon Apr 09, 2012 3:49 pm

Re: Jumpstarter Air Compressor

Post by Blenderite » Sun Aug 03, 2014 8:37 am

U.S. Water Rockets1 wrote:The biggest enemy of the compressor is HEAT. Make sure you allow time for the compressor to cool off, or add some active cooling to it so it does not overheat. If it gets too hot, it will fail.
How about submerging it in water? WO:


-Blenderite

Check out my YouTube channel: https://www.youtube.com/c/Blenderite

"Get it right, then go for GREATNESS!"

User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1773
Joined: Sat Feb 03, 2007 3:24 pm

Re: Jumpstarter Air Compressor

Post by U.S. Water Rockets1 » Sat Aug 09, 2014 10:35 pm

DogLover wrote:
U.S. Water Rockets1 wrote:The biggest enemy of the compressor is HEAT. Make sure you allow time for the compressor to cool off, or add some active cooling to it so it does not overheat. If it gets too hot, it will fail.
How about submerging it in water? WO:
You're close! You can coil some copper tube around the metal part of the compressor and flow cool water through the coil. That is an easy way to keep a compressor cool.


Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison

Post Reply