Metalic gardena connected to quick-release for compressors

Discussion about Compressors, hose, pipes, fittings, launchers, release mechanisms, and launch tubes.
Post Reply
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Metalic gardena connected to quick-release for compressors

Post by RaZias »

These are photos of a metalic quick-release gardena glued by epoxy to a metalic quick-release for compressors.

As you see this allows to connect it to a hose with a small lumen. A small lumen means that the hose has a small volume inside so all effort to pressurize goes to the rocket.

Hoses with a big lumen means more volume to pressurize...
Foto1.jpg
Foto2.jpg
You do not have the required permissions to view the files attached to this post.


Research and Development is the soul of WR
User avatar
Jelo
WRA2 Member
WRA2 Member
Posts: 225
Joined: Wed Sep 16, 2009 4:38 pm

Re: Metalic gardena connected to quick-release for compresso

Post by Jelo »

that seems pretty advanced :mrgreen:


Anto'

always wear a raincoat
User avatar
RaZias
WRA2 Member
WRA2 Member
Posts: 751
Joined: Mon Jul 14, 2008 3:16 pm

Re: Metalic gardena connected to quick-release for compresso

Post by RaZias »

Jelo wrote:that seems pretty advanced :mrgreen:
The advantage is to easly change the house and the hability to connect to any house made for compressors.

I use a 20 bar house, later I can change for a 30 bar use for example.


Research and Development is the soul of WR
eljose707
Advanced Member
Advanced Member
Posts: 15
Joined: Sun Oct 25, 2009 4:49 pm

Re: Metalic gardena connected to quick-release for compresso

Post by eljose707 »

Cool!


Post Reply