These are photos of a metalic quick-release gardena glued by epoxy to a metalic quick-release for compressors.
As you see this allows to connect it to a hose with a small lumen. A small lumen means that the hose has a small volume inside so all effort to pressurize goes to the rocket.
Hoses with a big lumen means more volume to pressurize...
Metalic gardena connected to quick-release for compressors
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Metalic gardena connected to quick-release for compressors
Research and Development is the soul of WR
-
- WRA2 Member
- Posts: 225
- Joined: Wed Sep 16, 2009 4:38 pm
Re: Metalic gardena connected to quick-release for compresso
that seems pretty advanced
Anto'
always wear a raincoat
always wear a raincoat
-
- WRA2 Member
- Posts: 751
- Joined: Mon Jul 14, 2008 3:16 pm
Re: Metalic gardena connected to quick-release for compresso
The advantage is to easly change the house and the hability to connect to any house made for compressors.Jelo wrote:that seems pretty advanced
I use a 20 bar house, later I can change for a 30 bar use for example.
Research and Development is the soul of WR
-
- Advanced Member
- Posts: 15
- Joined: Sun Oct 25, 2009 4:49 pm