i use paintball equipment for my air-supply for the launcher

Discussion about Compressors, hose, pipes, fittings, launchers, release mechanisms, and launch tubes.
Post Reply
User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

i use paintball equipment for my air-supply for the launcher

Post by ninja_iga »

hi guys

i'm actually in the paintball industry, and i have access to various equipments which i think is great to share with you guys.


i use a paintball HPA tank (high pressure air) the small (48ci) tank that attaches to a paintball marker.
this is always fitted with a regulator, output usually to 800psi (some are low output, 450psi).

from there, using parts from my spares bin, i have a SmartParts Ion (a popular entry level electro pneumatic paintball marker) regulator (most electro marker regs will work) that does between 0-300psi.

i use a macro hose from the tank output into the reg's input, from the reg output i have a remote line (fitted with a 0-300psi gauge) that is about 1meter coiled length, that connects to the nipple on the launcher's hose.
the regulator is adjustable via a hex nut on the bottom.

point of all this is, i have a setup that is relatively cheap, safe, and it works as well as a Scuba setup without the weight!
the tank's about 1.5kg / 3.1lb
i've not tested extensively yet, but i reckon it'll fill a 12liter WRocket to 120psi a couple times :)

will post pics when i got the time :D


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
User avatar
Jelo
WRA2 Member
WRA2 Member
Posts: 225
Joined: Wed Sep 16, 2009 4:38 pm

Re: i use paintball equipment for my air-supply for the laun

Post by Jelo »

cwl dyou think you could snatch a few guns and send them to me? :mrgreen:


Anto'

always wear a raincoat
User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

my air supply setup.

the red component is the on/off for the HPA tank.

the black long part is a paintball marker regulator. On top is fitted a head (similar to the red one) but with 2 outputs. One goes out through the hose (called the remote line) 2nd one is the 0-300psi gauge.

i adjusted it to 120psi output.
regulator's adjustment is done on hex nut at the bottom near the 90deg macroline joint.

the entire setup is about RM500+ with the HPA tank.

built from parts in my spares bin, only thing i bought new was the red on/off!

try http://www.smartpartsparts.com or your local paintball supply store.


How to fill the tank, one may ask.
simple, fill at your local paintball field.
You do not have the required permissions to view the files attached to this post.


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
User avatar
rockets-in-brighton
Senior Member
Senior Member
Posts: 431
Joined: Fri Jun 20, 2008 12:33 pm

Re: i use paintball equipment for my air-supply for the laun

Post by rockets-in-brighton »

ninja_iga wrote:
i use a paintball HPA tank (high pressure air) the small (48ci) tank that attaches to a paintball marker.
this is always fitted with a regulator, output usually to 800psi (some are low output, 450psi).

from there, using parts from my spares bin, i have a SmartParts Ion (a popular entry level electro pneumatic paintball marker) regulator (most electro marker regs will work) that does between 0-300psi.

i use a macro hose from the tank output into the reg's input, from the reg output i have a remote line (fitted with a 0-300psi gauge) that is about 1meter coiled length, that connects to the nipple on the launcher's hose.
the regulator is adjustable via a hex nut on the bottom.

point of all this is, i have a setup that is relatively cheap, safe, and it works as well as a Scuba setup without the weight!
the tank's about 1.5kg / 3.1lb
i've not tested extensively yet, but i reckon it'll fill a 12liter WRocket to 120psi a couple times :)

will post pics when i got the time :D

Very interesting, and I think water rocketeers might want to explore this route if it avoids the licensing/certification issues that apply with bottled air like scuba gear. Presumably you could charge these tanks from a compressor, and there is no problem with buying, owning and transporting this equipment?


Cheers
Steve
Rockets-in-Brighton
WEB: http://groups.google.co.uk/group/rockets-in-brighton
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1774
Joined: Sat Feb 03, 2007 3:24 pm

Re: i use paintball equipment for my air-supply for the laun

Post by U.S. Water Rockets1 »

That looks like a great portable setup. We use a compressor that needs a power source or a very long power cord. A portable system like yours would make setup and teardown of our equipment much faster and easier. Nice and light and easy to move.

Welcome to the forum!


Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
SaskAlex
WRA2 Member
WRA2 Member
Posts: 238
Joined: Tue Apr 07, 2009 2:36 pm

Re: i use paintball equipment for my air-supply for the laun

Post by SaskAlex »

CO2 systems use liquid co2. At normal temperatures it condenses at about 800 psi, if I'm not mistaken. So you can store a lot more energy at a lower pressure and in a much smaller container. If you were using a regular compressor to refill them, you would just have compressed air, and you would be able to fill far fewer rockets. I'm sure someone will correct me if I'm wrong on any of this. Anyways, it's great setup if refilling your tank is convenient for you.


User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

allow me to explain ;)

yes, it's easily obtainable if you know where is your local paintball supply and field (usually fields have the compressor or equipment to fill your tank)
of course local laws apply (but unlike Scuba certification etc) but it's more towards the paintball markers (some classify as a firearm, as we do in Malaysia)
but the tank and the components you see here are perfectly ok.

we ARE building and firing rockets anyway....... :roll:

ok the paintball HPA (high-pressure air) i did not pose the pic yet, allow me to share with an attachment.
our HPA tanks are 2 types, 3000psi and 4500psi tanks.

3000psi are just alloy tanks with a regulator and 4500psi are thinner alloy tanks with carbon fibre wrap (for lightweight and strength), with either a low pressure (300-450psi) or high pressure (700-850psi) regulator which is common.

with my cheapo 48ci 3000psi tank, i tested a few times last week, a single bottle 1.5liters can be filled at least 10 times.
with my larger 70ci 4500psi CF tank, i think it's at least 100% more.


with regards to CO2 tanks, which is quite common in paintball, it's usable in our application too, just use the setup i'm using, and the only reason i didnt use it is because i felt that that Co2 isnt too pressure stable (although the reg should take care of that)
yea, Co2 condenses to gas form in room temperature at about 800-900psi (we're averaging 28deg Celcius here!)


thanks for the warm welcome!


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

http://www.guerrillaair.com/products.php?page=2 for the 3000psi tanks

http://www.guerrillaair.com/products.php?page=5 for the 4500psi tanks


these are just examples :)


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
fatty_weird
New Member
Posts: 8
Joined: Tue Jan 19, 2010 1:26 pm

Re: i use paintball equipment for my air-supply for the laun

Post by fatty_weird »

Cool stuffs..
I still using the regular compressor with car battery as power supply..
But due to it can only support up to 100psi.
I need to find a higher pressure so that i can try 120psi or 130 psi for my water rocket.
I think this is useful.
Will discuss with friends then try go get one of this.
:)


User avatar
Spaceman Spiff
WRA2 Member
WRA2 Member
Posts: 681
Joined: Sat Feb 24, 2007 11:06 am

Re: i use paintball equipment for my air-supply for the laun

Post by Spaceman Spiff »

fatty_weird wrote:Cool stuffs..
I still using the regular compressor with car battery as power supply..
But due to it can only support up to 100psi.
I need to find a higher pressure so that i can try 120psi or 130 psi for my water rocket.
I think this is useful.
Will discuss with friends then try go get one of this.
:)
If you get a small battery powered compressor that is marked "300PSI", it will probably break down if you try and get that much pressure. The gears get too hot and melt. If you run it up to 200PSI max, then it should work for you without melting.


Spaceman Spiff
"What goes up, must come down"
wenjiun
New Member
Posts: 5
Joined: Wed Oct 07, 2009 5:10 am

Re: i use paintball equipment for my air-supply for the laun

Post by wenjiun »

ninja_iga, I would love see your set-up in action, if you plan to have a rocket launch in the future (assuming you are near to KL-Selangor), can I be a spectator?


User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

wenjiun

sure thing man.
call me @ 012-211-3039


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

hey guys:
i'm in the Damansara area, i usually launch in the Bandar Utama fields


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
wenjiun
New Member
Posts: 5
Joined: Wed Oct 07, 2009 5:10 am

Re: i use paintball equipment for my air-supply for the laun

Post by wenjiun »

I have sent you an SMS, giving you my contact.

Could you please provide the location of Bandar Utama field in Google Map?

Thanks for you reply and hope to meet you soon.


User avatar
ninja_iga
WRA2 Member
WRA2 Member
Posts: 123
Joined: Wed Nov 04, 2009 8:15 am

Re: i use paintball equipment for my air-supply for the laun

Post by ninja_iga »

ok, just in case:

it's the BU6 field.
http://maps.google.com/maps?f=q&source= ... 09645&z=17


Stanlley Tai

+6012-211-3039 begin_of_the_skype_highlighting              +6012-211-3039      end_of_the_skype_highlighting
STR
Stanlley Tai Rockets

Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
Post Reply