The latest contraption from SPEW Works

Post photos and videos of your rocket, launches and your onboard video or photos here. A wide variety of formats supported including attachments and embedded youtube.
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

The latest contraption from SPEW Works

Post by bugwubber »

Have had some ideas that demanded to be manifest in physical form. So thought I'd share what is current transpiring in the SPEW hangar.

Below is the ACROPHOBIA module loaded on the THBBT rocket. Also on-board are the OBSERVE exterior optics pods.

Some of the goals of this build were to construct an ogive nosecone, a new midbody payload bay and external camera pods.

Still plenty of work to be done.
tmp_7285-20141018_184843-1220741839.jpg
tmp_7285-20141018_184843-1220741839.jpg (6.54 MiB) Viewed 113 times
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets »

bugwubber wrote:Have had some ideas that demanded to be manifest in physical form. So thought I'd share what is current transpiring in the SPEW hangar.

Below is the ACROPHOBIA module loaded on the THBBT rocket. Also on-board are the OBSERVE exterior optics pods.

Some of the goals of this build were to construct an ogive nosecone, a new midbody payload bay and external camera pods.

Still plenty of work to be done.
tmp_7285-20141018_184843-1220741839.jpg
That looks like a work of art.

Very nice job.

The "nacelles" have a "star trek" look to them.
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

Thanks! Each nacelle will have a camera loaded in it. Hopefully it will always have a good view.
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets1 »

bugwubber wrote:Thanks! Each nacelle will have a camera loaded in it. Hopefully it will always have a good view.
What way are you pointing the cameras?
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

U.S. Water Rockets1 wrote:
bugwubber wrote:Thanks! Each nacelle will have a camera loaded in it. Hopefully it will always have a good view.
What way are you pointing the cameras?
Out down and sideways.. oh and in and up. These cheap little cameras have two neat features-hemisphere wide angle lens that can flip 90 deg and software that lets you pan around the image.

For example, in this previous video, the onboard camera is not moving at all:
[youtube]http://www.youtube.com/rlGQkL4BcMc[/youtube]
Bugwubber

Team S.P.E.W.
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

A couple more build pictures. Finally got the shroud right after trying four different approaches. PET just wasn't cutting it at this length with a transition. Next I need to paint the shroud and build out the recovery module.
tmp_673-20141027_2207101787852042.jpg
tmp_673-20141027_2207101787852042.jpg (2.94 MiB) Viewed 96 times
tmp_673-20141017_224103-1767020729.jpg
tmp_673-20141017_224103-1767020729.jpg (2.97 MiB) Viewed 96 times
tmp_673-20141016_111548495229760.jpg
tmp_673-20141016_111548495229760.jpg (2.66 MiB) Viewed 96 times
tmp_673-20141027_221058-1053344379.jpg
tmp_673-20141027_221058-1053344379.jpg (2.4 MiB) Viewed 96 times
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets »

bugwubber wrote:
U.S. Water Rockets1 wrote:
bugwubber wrote:Thanks! Each nacelle will have a camera loaded in it. Hopefully it will always have a good view.
What way are you pointing the cameras?
Out down and sideways.. oh and in and up. These cheap little cameras have two neat features-hemisphere wide angle lens that can flip 90 deg and software that lets you pan around the image.

For example, in this previous video, the onboard camera is not moving at all:
[youtube]http://www.youtube.com/rlGQkL4BcMc[/youtube]

Which cheap camera are you using? There are 2 or 3 of them with the tilting lens, but the widest angle one we've seen has only 100 degrees of view.
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

U.S. Water Rockets wrote:

Which cheap camera are you using? There are 2 or 3 of them with the tilting lens, but the widest angle one we've seen has only 100 degrees of view.
SpyGear. Panosphere. 360
Some cheap toy cameras I found on the clearance isle for $5
Attachments
tmp_10577-20141028_232348728703908.jpg
tmp_10577-20141028_232348728703908.jpg (2.17 MiB) Viewed 90 times
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets »

Interesting. We've not encountered those before. Good find for $5!
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

Here's the ACROPHOBIA module fitted to the THBBT rocket with the mating shroud largely finished.
tmp_12804-20141104_1614131064027936.jpg
tmp_12804-20141104_1614131064027936.jpg (2.12 MiB) Viewed 81 times
The mating shroud has an internal bay for items like.this illumination halo
THBBT rearview
THBBT rearview
tmp_12804-20141104_1610491259893756.jpg (2.25 MiB) Viewed 81 times
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets »

That thing is definitely a work of art. Will you fly it? It looks too good to get banged up!
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

U.S. Water Rockets wrote:That thing is definitely a work of art. Will you fly it? It looks too good to get banged up!
Absolutely!

In Scouts, we race our works of art!
tmp_14016-DSC019851937617020.JPG
tmp_14016-DSC019851937617020.JPG (411.31 KiB) Viewed 78 times
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets
WRA2 Member
WRA2 Member
Posts: 400
Joined: Tue Jan 30, 2007 8:16 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets »

bugwubber wrote:
U.S. Water Rockets wrote:That thing is definitely a work of art. Will you fly it? It looks too good to get banged up!
Absolutely!

In Scouts, we race our works of art!
tmp_14016-DSC019851937617020.JPG

Pinewood derby?

How did you make that????
User avatar
bugwubber
WRA2 Member
WRA2 Member
Posts: 1087
Joined: Wed Dec 19, 2012 2:47 am

Re: The latest contraption from SPEW Works

Post by bugwubber »

U.S. Water Rockets wrote:
bugwubber wrote:
U.S. Water Rockets wrote:That thing is definitely a work of art. Will you fly it? It looks too good to get banged up!
Absolutely!

In Scouts, we race our works of art!
tmp_14016-DSC019851937617020.JPG

Pinewood derby?

How did you make that????
This one was Powderpuff Derby for Girl scouts. Daughter was a Daisy so I asked her what she wanted. A pony.

She did the final painting. I carved out the shape using a Dremel with a sanding hub, xacto knife, and sand paper.

We finished it with metallic blue paint and a white star on its forehead. And yes she got first place for Daisys. That was our first race.
Bugwubber

Team S.P.E.W.
User avatar
U.S. Water Rockets1
WRA2 Member
WRA2 Member
Posts: 1778
Joined: Sat Feb 03, 2007 3:24 pm

Re: The latest contraption from SPEW Works

Post by U.S. Water Rockets1 »

bugwubber wrote:This one was Powderpuff Derby for Girl scouts. Daughter was a Daisy so I asked her what she wanted. A pony.

She did the final painting. I carved out the shape using a Dremel with a sanding hub, xacto knife, and sand paper.

We finished it with metallic blue paint and a white star on its forehead. And yes she got first place for Daisys. That was our first race.

You're just full of amazing talents. That's really nicely done. Your daughter is really lucky!
Team U.S. Water Rockets
Visit USWaterRockets.com
Visit our Blog
Tune in to our YouTube Channel
Visit our Facebook page
Visit our Twitter Page
Opportunity is missed by most people because it is dressed in overalls and looks like work. --Thomas Edison