yes, I have registered a PayPal account that links to my credit card, therefore I usually have no problem paying online. The problem usually is shipping.
In Malaysia we used to have problem getting money from PayPal if we were to sell something online (such as in ebay etc.). There is no easy way to cash out money from PayPal. But I think this has been solved recently as PayPal officially entered into Malaysia.
Back to the topic, we are trying now to get friends/relatives in US to send back the PL Premium Glue to us.
i'm getting a batch of PL Premium in, about CNY time.
if you want any, let me know.
i'm bringing in about 10 tubes.
i've got 300 Kickapoo bottles to glue
got sponsored!
Stanlley Tai
+6012-211-3039 begin_of_the_skype_highlighting +6012-211-3039 end_of_the_skype_highlighting
STR
Stanlley Tai Rockets
Legion Paintball
events, supplies, design and manufacturer, training and consultation
play hard but play safe!
www.legionpaintball.org
Hi .. im from perak ... im a student in form 5 of smk khir johari tanjung malim .. our team got number 10 at national level which is last year 2009 at Universiti Malaya .. ..
sure! there's plenty of literature here and on the Net.
what nozzle size are you launching? 22mm (full bore) or 9mm Gardena nozzle (restricted with the garden quick disconnect) ?
i'm launching with 22mm, i used 20mm PVC components. The 20mm PVC socket, needs to be machined (by a machine shop) to fit the PET bottles we get in M'sia. Shouldnt cost you more than RM20-30.
sure! there's plenty of literature here and on the Net.
what nozzle size are you launching? 22mm (full bore) or 9mm Gardena nozzle (restricted with the garden quick disconnect) ?
i'm launching with 22mm, i used 20mm PVC components. The 20mm PVC socket, needs to be machined (by a machine shop) to fit the PET bottles we get in M'sia. Shouldnt cost you more than RM20-30.
Thanks for the info and pictures, I'm also launching with 22mm.
My problem is to make a groove for the O ring. The 20mm PVC that I can get is too thin to make a groove. I also can't get smaller PVC pipe (I think it is not available in Malaysia) to insert in the 20mm PVC like I had read in the internet.
ninja_iga wrote:you'll need to use the 20mm SOCKET (to join 2 pipes together) and have it machined slightly to the bottle's size.
in doing this, you're making a Clark Cable launcher
You mean the 20mm socket will be machined to fit the inner neck of the bottle and act as a seal? (no need O ring @ rubber seal)
and I guess the 20mm socket have to be machined slightly tappered.
I'm not making a Clark Cable launcher, but if this method can seal the WR like the O ring @ rubber seal did, I can try to my launcher.
Re: anyone from Malaysia?
isekb
Forum Administrator. 
